POWER

• Engine: Honda 4-cycle, recoil starter
• Horsepower: 8 hp, 2:1 reduction centrifugal clutch

UNIT

• Drive: Primary 6822 V-belt to 31:1 reduction gear box, roller chain to drive wheels; two 6934 V-belts to blade reel
• Capacity: Operational up to 22,000 sq. ft. per hr.; Travel up to 220 ft. per min. (2.53 mph)
• Depth adjustment: Adjustable for depth with finger-tip screw.
• Seeding width: 20-inches
• Blades: 10 heat-treated, high-carbon steel
• Tires: Front drive, 11 x 4.00 x 5 turf tread;
• Rear drive, 4:10 x 3/50 x 4 saw-tooth tread

DIMENSIONS

• Total weight: 400 lbs.
• Width: 36 inches
• Length: 35 inches
• Height: 43 inches

HOPPER

• Capacity: 0.83 cu ft (0.02 m3)
• Hopper Size:
• Height: 13 inches (33 cm)
• Width: 8.5 inches (22 cm)
• Length: 18.5 inches (47 cm)
• Seeds: Most types of grass seed

METERING SYSTEM

• Metering system: Stainless steel bottom & slide with triangular holes adjusted in size by cam gauge.
• Rotor bar: Internal 5-bladed neoprene rubber
• Number of outlets: 10
• Seed flow control: Rotor bar restricts flow when stopped; slide shuts off flow positively.
• Rotor bar drive: V-belt drive powered from front-wheel drive unit
• Slide: Manual lever for on/off
• Maintenance: Rotor bar and metering bottom easily removed for servicing

SEED PLACEMENT SYSTEM

• Seed tubes: Clear plastic with non-collapsible wire reinforcement
• Spacing between seed outlets: 2-inches (5 cm)
• Disk assembly: 7" (17.78 cm) steel discs with spring-loaded scrapers.
• Shoe injector option: 10 high-carbon, heat-treated shes, spaced on 2-inch (5 cm) centers
• Slicing blades: Ten 9" heat-treated anneal spring steel blades; saw-tooth designed for slicing; spaced on 2-inch (5 cm) centers on 1-inch (2.5 cm) hex shaft in offset alignment.